You can rest assured to buy customized Wood Stainless Steel 304 316 Roofing Countersunk Decking Self Tapping Screw from us. We look forward to cooperating with you, if you want to know more, you can consult us now, we will reply to you in time!
Self tapping screws are more common in the daily link of thin metal plate (steel plate, saw plate and so on). Due to the high strength of the thread surface of the tapping screw (≥HRC45), so when linking, screw the tapping screw into the connection piece which is made out of the thread bottom hole in advance, so that the inner thread can be tapped out of the thread bottom hole of the link piece to complete the connection.
Self tapping screw hardness is high, thread spacing is wide, thread depth, the surface is not smooth, wood screw is on the contrary, another difference is more obvious, wood screw after the segment without thread. Wood screw thread thin, blunt and soft point. Tapping screw threads are thick, sharp and hard.
The use of tapping screws must be drilled first, and the aperture must be limited. There are cost savings in some areas by eliminating the need for pre-drilling. This is a set of drilling, tapping, tightening in a single operation of the self-tapping screws. The surface hardness and core hardness of the drilling screw is higher than that of the general self-tapping screw. This is because the drilling screw has a drilling operation. In addition, the drilling screw needs to be conducted through the test to test the screw can be drilled and tapped in the specified time.
Wood Stainless Steel 304 316 Roofing Countersunk Decking Self Tapping Screw
|Stainless Steel:SS304, SS316,SUS410,SUS435
Ruspert,Dacrotized;Polishing, Plain, Sand Blasting
|Busy season:15-25days,Slack seaon:10-15days
Stainless steel: bolts and nuts
|Get Free Samples for standard fastener from Gangtong Zheli Fastener
For more information visit:www.gtzlfastener.com